TeKit USB 3.0 to SATA 7+15 pin adapter cable 42 cm
Connects a 2.5" SATA drive to USB 3.0 with integrated power, 42 cm cable, 5 Gb/s maximum transfer rate
- Connector count3
- Connector detailsUSB3.0 To Sata 7+15 pin Converter Adapter
- Cable length0.5 ft (0.15 m)
- Product typeUSB3.0 To Sata 7+15 pin Converter Adapter
- Product colorBlack
- Overall length< 1 in
- Connect 2.5" SATA drives via USB 3.0
- Powered 7+15 pin connector for 2.5" drives
- 42 cm cable length for flexible placement
- Backward compatible with USB 2.0 and 1.1 ports
- Supports hot-swap and plug-and-play operation
USB 3.0 to SATA adapter for 2.5" drives
This adapter connects a 2.5-inch SATA hard drive or SSD to a USB 3.0 port using a combined 7+15-pin connector and integrated power. The 42 cm cable supports Mass Storage Class drives for straightforward external access. It works with Windows 7, Vista, XP, Server 2003 and Server 2008 (32- and 64-bit) with current service packs. The unit weighs 45 g and ships as a single cable.
Replaces bare drive docks
When you need temporary access to a bare 2.5" drive without installing it inside a chassis, this adapter eliminates the dock or enclosure. The jump is worth it for data recovery, cloning or occasional backups where a permanent bay is unnecessary. Hot-swapping and plug-and-play let you change drives without rebooting. It is not suited for 3.5-inch drives or drives that require external power beyond the USB port.
Sustained transfers at USB 3.0 speeds
Under continuous read or write loads the link runs at up to 5 Gb/s SuperSpeed, falling back to USB 2.0, 1.1 or 1.0 and SATA 1.5 Gb/s on older ports. Shielded construction helps maintain signal integrity during long copy sessions. Performance scales with the attached drive and host controller rather than the adapter itself. The short 42 cm length keeps voltage drop minimal for 2.5" units.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | USB3.0 To Sata 7+15 pin Converter Adapter |
| Product color | Black |
| Design style | Cable |
| Ports & slots | |
| Connector count | 3 |
| Connector details | USB3.0 To Sata 7+15 pin Converter Adapter |
| Size & build | |
| Overall length | < 1 in |
| Cable shielding | Yes |
| Cable length | 0.5 ft (0.15 m) |
Questions about this item
Will the 42 cm cable reach a 2.5" drive in a standard drive bay?
The 42 cm length connects a USB 3.0 port to a 2.5" SATA drive with the combined 7+15 pin connector; measure your chassis to confirm reach.
Does the USB 3.0 plug supply enough power for a 2.5" drive without an external adapter?
The cable draws power from the USB 3.0 port for 2.5" Mass Storage Class drives; ensure the port can deliver the required current.
Is the 7+15 pin SATA connector replaceable if the pins bend?
The connector is moulded onto the 42 cm shielded cable, so a damaged 7+15 pin end means replacing the whole adapter.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX DC-0048 SATA cable 1.6 ft 5-pack
- Sata to Sata 7 Pin
- SATA Cables





