THE ORDINARY SATA 15 Pin Power Y-Splitter Cable 8 Inches 2 Pack
Splits one 15-pin SATA power connector into two for HDDs, SSDs, optical drives and PCI cards, supplied as an 18 AWG two-pack
- Key featuresY-SPLITTER SATA CABLE powers two Serial ATA HDD, SSD, optica
- Powers two SATA drives from one PSU port using 15-pin Y-splitter design
- 18 AWG conductors deliver 3.3V, 5V and 12V for reliable operation
- 8-inch harness length suits most internal cable routing needs
- Two-pack provides spare cables for builds, upgrades or repairs
- Compatible with 2.5" SSD, 3.5" HDD, optical drives and PCIe cards
Splitter Cable for SATA Drives
This Y-splitter cable powers two Serial ATA devices from a single power supply connection. It suits builders adding a 2.5" SSD, 3.5" HDD, optical drive or PCIe card when SATA power ports are limited. The 2-pack provides a spare for upgrades or repairs.
Build Quality and Daily Use
Each splitter carries one 15-pin male and two 15-pin female connectors on flexible 18 AWG conductors. Snug-fitting drive connectors with channel guides on the supply end resist accidental disconnection. The 8-inch harness keeps routing tidy inside most tower chassis.
Upgrade Path and When It Helps
The cable avoids the cost of replacing a power supply simply to gain extra SATA power outputs. It is not suited for installations that need more length than the supplied harness or for powering devices beyond the 3.3V, 5V and 12V rails provided by the existing supply.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 15-pin SATA power interface supply, and what voltage rails are used?
The splitter delivers 3.3V, 5V and 12V from a single PSU SATA power port to two drives, using 18 AWG conductors for each rail.
What clearance and connector style are needed to fit the Y-splitter inside a case?
The harness is 8 inches long with snug-fitting 15-pin female drive connectors and a male PSU connector that includes channel guides for a secure fit.
How is the splitter installed, and what step is often missed?
Plug the male end into the PSU SATA power port, then attach both female ends to the drives; the step many miss is verifying the PSU can handle the extra 3.3V, 5V and 12V load before powering on.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





