THE ORDINARY SATA Cable III 3-Pack 6Gbps Straight Locking Latch 50cm 18 Inch Black
Three SATA cables with straight locking connectors, each 50 cm long, support 6 Gbps data transfer for hard drives and optical drives
- Product colorBlack
- Transfer files quickly with 6 Gbps SATA 3.0 support
- Secure connections via locking latches on both ends
- Shielded tinned copper cores reduce outside interference
- Three cables provide spares for multiple drives or RAID
- 18 inch straight connectors fit tight internal spaces
Three-cable SATA III kit
This pack contains three straight SATA III data cables, each 50 cm or 18 inches long, with locking latches on both ends. They connect motherboards or host controllers to internal Serial ATA hard drives, SSDs and optical drives. The black cables support the SATA 3.0 specification for up to 6 Gbps transfer rates. A three-pack suits builds that need several drives or a RAID array.
Builders adding multiple SATA drives
The cables suit anyone installing several hard drives, SSDs or DVD drives that use the standard SATA interface. The locking latch helps keep connections secure inside a case that may see vibration. Systems that rely only on M.2 or PCIe storage will not need these cables. Buyers who require right-angle connectors for tight routing should look for a different design.
6 Gbps SATA 3.0 rating
The single specification that decides compatibility is the SATA 3.0 rating, which enables up to 6 Gbps data transfer and remains backwards compatible with SATA I and SATA II devices. Actual throughput will depend on the drive and controller used.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
What type of motherboard connector is required for these cables?
A standard SATA port on the motherboard or host controller is required for each cable.
Will these cables work with a SATA II hard drive?
Yes, the cables are backwards compatible with SATA I and SATA II devices.
How can I verify the cables are seated correctly after installation?
The locking latch on each straight connector clicks into place to confirm a secure connection.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





