Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Liquid metal thermal compound with 73 W/mK conductivity for CPU and GPU cooling, not compatible with aluminium
Thermal Grizzly Conductonaut TG-C-005-R is a liquid metal thermal compound with a thermal conductivity of 73 W/mK. It is intended for experienced builders who need maximum heat transfer on nickel-plated copper or silicon surfaces. The product is not suitable for aluminium components because the alloy causes corrosion. It also conducts electricity, so care is required to avoid short circuits.
The compound maintains its performance across a long-term operating range of 10 °C to +140 °C and remains stable even with prolonged use. Increased indium content in the eutectic alloy of tin, gallium and indium contributes to consistent heat dissipation over time. It is not recommended for large cooling systems where the liquid consistency could migrate away from the die. The material also functions down to -50 °C for extreme cooling scenarios.
A synthetic needle on the syringe allows precise placement on CPU or GPU dies, but the liquid viscosity of 0,0021 Pas means it spreads quickly and can bridge gaps if over-applied. Users must mask surrounding components because electrical conductivity creates a short-circuit risk. The paste cannot be used on aluminium heatsinks or cold plates; doing so causes permanent surface damage. Clean-up requires specific solvents rather than standard alcohol wipes.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Product line | Conductonaut |
| Model name | TG-C-005-R |
| Part number | TG-C-005-R |
| Performance | |
| Thermal conductivity | 73 W/mK |
| Size & build | |
| Net content | 1.0g |
| Environment & compliance | |
| Continuous-use temperature | 10 °C / 140 °C |
Yes, the alloy is rated for continuous operation from 10 °C to 140 °C and maintains its 73 W/mK conductivity across that range.
No, the liquid metal reacts with aluminum and causes permanent corrosion; it must be applied only to nickel-plated copper or bare silicon surfaces.
Yes, Conductonaut conducts electricity, so you must mask off surrounding components and apply sparingly to prevent shorts on any board, old or new.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?