Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
High-compressibility thermal pad for SSDs and GPUs, 100x100x0.5mm, electrically non-conductive, two-pack
This twin-pack supplies two black thermal pads measuring 100 x 100 mm with a 0.5 mm thickness. They are designed for SSDs, GPU coolers, water blocks and voltage-regulator modules. The electrically non-conductive material prevents short circuits on exposed circuitry. Builders upgrading laptop or desktop cooling will find the size convenient.
Peel the protective films, place a pad on the component and press the heatsink down; the pad conforms to uneven surfaces thanks to its higher compressibility. Misalignment is the usual problem — once the pad touches the die it bonds quickly and cannot be repositioned without tearing. Cutting a pad to a smaller shape is possible with a sharp blade but wastes the second piece.
Verify that the gap between your chip and cooler matches the 0.5 mm pad height; a thicker or thinner gap will reduce contact pressure. Ensure the mating surfaces are clean and free of old paste or pad residue. Confirm the 100 x 100 mm dimensions cover the entire die area you intend to cool.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-MP-A-100-100-05-2 |
| Part number | TG-MP-A-100-100-05-2 |
After fitting the pad you should see noticeably lower component temperatures under load and the pad will have compressed evenly to fill the gap between the die and cooler.
The pack includes two black Minus Pad Advance sheets measuring 100 x 100 x 0.5 mm; no additional materials are needed — just cut to size and apply.
Choose Advance when you want better thermal conductivity and higher compressibility than Basic but do not need the maximum performance of the Pro series.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?