Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1.5 mm thick thermal interface pad in a two-pack, electrically non-conductive and sized 100 x 100 mm for SSDs, GPUs and other components
The Thermal Grizzly Minus Pad Advance is a 100x100mm thermal interface pad supplied as a 2-pack. Each black pad measures 1.5mm thick and is electrically non-conductive. It is designed to transfer heat from components such as SSDs, GPU coolers, voltage regulators and memory modules.
The Advance series offers improved thermal conductivity and higher compressibility than the Basic variant, making it a good fit for uneven surfaces or mixed-height components on a graphics card or motherboard. Buyers who require the maximum conductivity and compressibility available in the range should look at the Pro series instead.
Verify that a 1.5mm pad matches the gap between your cooler and the target chips; a different thickness may be required for optimal contact. Ensure the 100x100mm dimensions can be cut or applied to cover all necessary zones without overlapping adjacent circuitry.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-MP-A-100-100-15-2 |
| Part number | TG-MP-A-100-100-15-2 |
The 100 x 100 mm pad covers most M.2 2280 SSDs and many GPU memory modules or voltage regulators in a single piece.
The Advance series offers higher compressibility than the Basic pads, allowing the 1.5 mm material to conform to uneven surfaces on GPU coolers and water blocks.
Check that the black pad material is evenly compressed across the component and that temperatures under load drop to expected levels for your SSD or GPU.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?