Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four-pack of non-conductive 120 x 20 mm thermal pads, 3.0 mm thick, for SSDs, GPUs and other components
The Thermal Grizzly Minus Pad Advance ships as a four-piece set of electrically non-conductive thermal pads. Each pad measures 120 by 20 millimetres with a 3.0 millimetre thickness. The material is designed for SSDs, GPU coolers, water blocks, voltage regulators and memory modules. Builders who need a quick, mess-free interface material for multiple components will find the pack convenient.
The Advance series improves on the Basic line with higher thermal conductivity and greater compressibility. Under continuous load the pads conform to uneven surfaces, maintaining consistent contact between the component and the heatsink. This reduces thermal resistance over long gaming or compute sessions without the pump-out effect sometimes seen with liquid compounds. The non-conductive formulation eliminates the risk of short circuits if material spreads beyond the die.
Verify that your SSD, GPU back-plate or VRM heatsink can accommodate a 3.0 millimetre gap; thinner or thicker gaps will require a different pad height. Confirm that four pieces of the stated 120 by 20 millimetre size cover all target surfaces, as some graphics cards need more or differently shaped pads. The product is not suited for applications that demand the highest conductivity of the Pro series or for gaps outside the specified thickness.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-MP-A-120-20-30-4 |
| Part number | TG-MP-A-120-20-30-4 |
The Advance series is engineered with higher compressibility than the Basic pads, so the 3.0 mm material conforms well to uneven surfaces and maintains steady contact during sustained loads.
You only need a clean, dry component surface and a tool to cut the sheet to size; no additional adhesive, paste or mounting hardware is required.
Yes — the electrically non-conductive material is designed for legacy VRMs and memory modules as well as modern SSDs and GPU coolers.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?