Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two 100 x 100 x 1.0 mm electrically non-conductive thermal pads for SSDs, GPUs and other electronics
Thermal Grizzly Minus Pad Basic is a two-pack of electrically non-conductive thermal interface pads. Each black pad measures 100 x 100 mm with a 1.0 mm thickness. They are designed to transfer heat from SSDs, GPU coolers, water blocks, voltage regulators and memory modules. The Basic series offers good thermal conductivity and an excellent price-performance ratio for builders and upgraders.
Verify that the components you intend to cool have gap heights compatible with a 1.0 mm pad. Ensure the mating surfaces are clean and flat so the pad can make full contact. Confirm that the 100 x 100 mm dimensions can be trimmed or applied without covering adjacent circuitry. The pads are non-conductive, eliminating the risk of shorts if they overlap exposed traces.
The pads sit between a heat source and a heatsink, backplate or water-block cold plate to fill microscopic air gaps. They require no curing time and can be cut to shape with scissors for smaller devices. Once installed they free the builder from handling liquid pastes and simplify future maintenance because they lift away cleanly. They work alongside active cooling solutions such as fans or liquid loops.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-MP-B-100-100-10-2 |
| Part number | TG-MP-B-100-100-10-2 |
The pack contains two black thermal pads measuring 100 x 100 mm at 1.0 mm thickness. No additional materials are needed for installation.
The Basic version offers good thermal conductivity with slightly lower compressibility and an excellent price-performance ratio. Advance improves conductivity and compressibility, while Pro provides outstanding conductivity and exceptional compressibility.
The 1.0 mm pad fills gaps between the component and cooler, ensuring electrically non-conductive contact for effective heat transfer on SSDs, GPU coolers or memory modules.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?