Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Ultra high-performance silicone thermal pad with 15 W/mK conductivity adapts like putty for optimal heat transfer
The Thermal Grizzly Minus Pad Extreme is an ultra high-performance thermal pad designed for CPUs and GPUs in high-performance computing builds. Its consistency resembles a kneaded mass that flows into microscopic gaps under minimal pressure. The self-adhesive silicone layer holds position during installation and maintains contact through thermal cycling. Enthusiasts and system integrators who need reliable gap-filling without liquid paste mess will appreciate the clean handling.
The 100 by 100 millimetre sheet can be cut to fit VRM arrays, memory modules or large GPU dies, while the 1.5 millimetre thickness bridges taller component stacks. High compressibility lets the material conform to uneven surfaces and fill micro-voids that thinner pads cannot reach. Thermal conductivity remains consistent across the full area, so heat spreads evenly to the heatsink. Extremely thin gaps below a fraction of a millimetre may still favour liquid metal or grease for absolute minimum resistance.
Because the pad is passive, it adds zero fan noise and draws no power while moving heat away from the die. The silicone compound resists drying, pumping out or bleeding over years of heating and cooling cycles. Stable thermal impedance keeps temperatures predictable, allowing fan curves to stay lower during sustained loads. No electrical conductivity means accidental contact with PCB traces poses no short-circuit risk.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The 100 x 100 mm sheet can be cut to size, letting you cover each chip and the main die on an older graphics card without gaps.
Tighten the cooler until the pad compresses evenly, then run a load test; steady temperatures show the silicone has filled every micro-gap.
Only the self-adhesive thermal pad is supplied; isopropyl wipes and a plastic scraper for old paste removal must be purchased separately.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?