Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
High-compressibility thermal pad kit bridges varying component heights on GPUs and SSDs while maintaining conductivity under pressure
The Thermal Grizzly Minus Pad High Compression comes as a two-pack of 120x100mm sheets, each 5.0mm thick. They are designed for enthusiasts modifying graphics cards with water blocks or replacing stock cooler pads. The pads suit builds where VRAM, voltage regulators and GPU dies sit at different heights.
These pads compress significantly under mounting pressure, allowing a single thickness to bridge varying gaps across a PCB. Thermal conductivity is maintained and can increase as pressure rises, so tight clamping does not degrade performance. The material is electrically non-conductive, preventing shorts if it overlaps circuitry.
At 5.0mm the pads fill substantial spaces between dies and cold plates, absorbing manufacturing tolerances without bottoming out. They run out of effective range when gaps exceed the compressed height or when a thinner, precise fit is required for low-profile modules.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-MP-HC-120-100-50-2 |
| Part number | TG-MP-HC-120-100-50-2 |
The 120 x 100 mm sheet can be trimmed to fit smaller components such as M.2 SSDs, giving you flexibility for both GPU and storage applications.
At 5.0 mm the pad compresses heavily under mounting pressure, maintaining or even improving thermal conductivity while bridging uneven gaps between dies and the cold plate.
The material is engineered to increase thermal conductivity as contact pressure rises, so it performs better the tighter the cooler is mounted.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?