Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Electrically non-conductive thermal pad in a two-pack sized 120 by 20 by 2.0 mm for SSDs, GPUs and other electronics
This Thermal Grizzly Minus Pad Pro pack contains two grey thermal interface pads sized 120 x 20 mm with a 2.0 mm thickness. They are designed to transfer heat from SSDs, GPU coolers, graphics card water blocks, voltage regulators and memory modules. The electrically non-conductive material prevents short circuits while filling gaps between surfaces. Builders upgrading laptop or desktop storage and graphics cooling will find the dimensions suit many M.2 slots and VRM arrays.
The pads suit enthusiasts who need reliable gap-filling on flat components such as M.2 drives or GPU memory chips where a 2.0 mm thickness matches the stock pad. They are less suited for buyers who need a thinner or thicker pad for tighter or looser clearances, or for anyone wanting a paste instead of a pre-cut pad. The two-piece pack also limits coverage for large heatsinks or multiple devices in one session.
Each pad can be trimmed with scissors to match the exact footprint of an SSD controller, VRM row or GPU die. Because the material is non-conductive, no insulating tape is required around exposed PCB traces. The 120 mm length allows a single strip to span several memory modules on a graphics card, freeing the builder from cutting many small squares. No curing time is needed, so the system can be reassembled and tested immediately.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-MP-P-120-20-20-2 |
| Part number | TG-MP-P-120-20-20-2 |
The pad measures 120 mm by 20 mm, so it fits M.2 2280 SSDs and narrow GPU memory rows; trim it with scissors if the target area is smaller.
Stacking pads adds thermal resistance; replace the original material with a single 2.0 mm Minus Pad Pro layer for best conductivity.
Remove the cooler and check for an even grey imprint across the component surface — no bare spots means the compressibility has closed the gap.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?