Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1.5 ml syringe of non-conductive thermal paste rated at 8.5 W/mK for CPUs, GPUs and consoles
Aeronaut is a 1.5 ml syringe of non-conductive gray grease rated at 8.5 W/mK thermal conductivity. It targets PC builders and console owners who want a step up from stock compound without the risk of liquid-metal shorts. The formula contains fewer metallic particles than premium Thermal Grizzly pastes yet still delivers reliable heat transfer for CPUs, GPUs and laptop coolers. No curing time means temperatures stabilise immediately after assembly.
That single figure tells you whether the paste meets your cooling budget; it sits well above basic silicone compounds but below liquid-metal alternatives. Electrical conductivity is 0 pS/m, so accidental contact with surrounding components will not cause shorts. Long-term operating range spans -150 °C to +200 °C and thermal resistance measures 0.0129 K/W, giving confidence for sustained loads on desktops, laptops, PS3 through PS5 and Xbox consoles. Viscosity of 110 to 160 Pas keeps the paste in place without pumping out.
The included syringe dispenses a controlled bead directly onto the die or cold plate, and the gray colour makes coverage easy to inspect. Common mistakes are applying too much paste or spreading it manually, which can trap air bubbles and raise temperatures. Because Aeronaut has no curing cycle, you can reseat the cooler immediately if the first mount looks uneven. The compound wipes off with isopropyl alcohol and leaves far fewer micro-scratches than abrasive pastes, preserving surface finish for future upgrades.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Product line | Aeronaut |
| Model name | TG-A-015-R |
| Part number | TG-A-015-R |
| Performance | |
| Thermal conductivity | 8.5 W/mK |
| Size & build | |
| Net content | 1.5ml/3.9 g |
| Environment & compliance | |
| Continuous-use temperature | -150 °C / 200 °C |
The 8.5 W/mK rating indicates very good heat transfer between the die and cooler, typically lowering temperatures noticeably versus stock paste.
Electrical conductivity is 0 pS/m so it is non-conductive, and the formula requires no curing — it performs immediately after application.
The 1.5 ml volume suits multiple CPU or GPU applications; the syringe tip lets you place a pea-sized dot or thin line directly on the heat spreader.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?