Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A highly compressible foam gasket that protects GPU dies and nearby components when using liquid metal, bridging height differences from 0.8 mm down to 0.15 mm and resisting gallium degradation
The Thermal Grizzly TG GPU Guard is a compressible foam gasket designed to shield GPU dies and adjacent surface-mounted components when using electrically conductive thermal interface materials such as liquid metal. It prevents short circuits and extends the lifespan of the liquid metal by limiting oxygen exposure. Builders applying liquid metal to graphics cards will find this essential for safe installation.
The universal 100 × 100 mm pad is trimmed with a scalpel to match the specific GPU die layout, and instructions guide the measuring and cutting process. The foam compresses from 0.8 mm down to 0.15 mm under cooler mounting pressure, automatically bridging height differences between the die and surrounding components. The gasket is not reusable and must be replaced if the cooler is removed, and it is explicitly not intended for CPU applications.
A single 100 × 100 mm sheet provides enough material for several installations across different graphics card models. The foam's gallium-resistant composition ensures it does not degrade during long-term contact with liquid metal. Users requiring a pre-cut shape for a specific card or those installing on CPUs will need a different solution.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-GG-100-100-08 |
| Part number | TG-GG-100-100-08 |
The 0.8 mm foam compresses to 0.15 mm under mounting pressure, fully bridging the height gap between the GPU die, SMDs and heatsink so liquid metal cannot spread onto the PCB.
One 100 × 100 mm universal pad is supplied; you must cut it to shape yourself using a scalpel or sharp knife following the included measuring and cutting instructions.
Only the universal 100 × 100 × 0.8 mm variant is offered; trim it to match your specific GPU die and surrounding SMD layout.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?