Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Electrically non-conductive thermal pads measuring 120 x 20 x 2.0 mm, supplied in a 4-pack for SSDs, GPUs and other electronics
The Minus Pad Advance is a 2.0 mm thick thermal pad sold in a four-pack of 120 x 20 mm pieces. It is designed for builders who need electrically non-conductive gap filling on graphics cards, SSD controllers, voltage regulators or memory modules. The Advance tier improves thermal conductivity and compressibility over the Basic series while keeping installation straightforward.
Thermal pads only conduct heat across the gap they fill; they do not move heat away like a heatsink or liquid loop. Performance depends on mating surfaces being flat and clean, and on the pad being compressed to its intended thickness without excessive force. A pad that is too thick for the gap will not compress fully, while one that is too thin leaves air pockets that degrade heat transfer.
Measure the distance between the component and its cooler to confirm a 2.0 mm pad matches the required compression range. Verify that the 120 x 20 mm rectangles can cover the target chips or be cut cleanly to smaller shapes without waste. Ensure the surfaces are free of old compound or protective films so the non-conductive pad makes full contact.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-MP-A-120-20-20-4 |
| Part number | TG-MP-A-120-20-20-4 |
Choose the 2.0mm thickness when the gap between your component and cooler measures close to two millimetres; thinner pads suit smaller gaps, thicker pads suit larger ones.
The advance series delivers improved thermal conductivity and higher compressibility than the basic series, so it fills uneven surfaces better and moves heat faster under load.
No, being electrically non-conductive means it is safe on any exposed circuitry — SSDs, GPU memory, voltage regulators — without risk of shorting pins or traces.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?