Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
High-compression thermal pad kit bridges uneven component heights on GPUs and SSDs while maintaining conductivity under pressure
The Minus Pad High Compression is a 120x100mm thermal pad designed for graphics card water-cooling conversions and SSD cooling. Each pack contains two pads at 4.0mm thickness. The electrically non-conductive material bridges VRAM, voltage regulators and GPU dies in a single application. Builders who need a precise pre-cut shape for a specific laptop or console should look elsewhere.
The pad maintains its thermal conductivity when heavily compressed between uneven component heights. Thermal performance can increase as contact pressure rises across VRM and memory modules. This makes it reliable for long gaming or compute sessions where clamp force varies. Users who require a fixed-thickness pad that never compresses will not find that characteristic here.
The compliant silicone formulation fills microscopic gaps without adding electrical risk. Because it adapts to height tolerances, mounting pressure stays even and pump or fan speeds do not need to compensate for poor contact. The material adds no active cooling noise or power draw. Buyers expecting a liquid-metal replacement with higher conductivity than silicone will not get that result.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-MP-HC-120-100-40-2 |
| Part number | TG-MP-HC-120-100-40-2 |
The pad is a passive thermal interface with no moving parts, so it adds no noise and generates no heat of its own; it simply conducts heat away from the component.
You will need the water block itself, mounting hardware, coolant loop components and a clean, flat mating surface on the GPU die and VRM areas.
Yes — the pads are designed to compress well beyond their nominal 4.0 mm thickness, bridging the height differences between VRAM, voltage regulators and the GPU die in a single application.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?