Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Electrically non-conductive thermal pad cools SSDs, GPUs and other components with high compressibility for optimal contact
This two-pack supplies a pair of 120 by 20 millimetre thermal pads cut to 1.0 millimetre thickness. They are built for SSDs, GPU coolers, graphics card water blocks and voltage-regulator or memory modules that need a thin, uniform interface. Electrically non-conductive material prevents shorts on exposed circuitry.
The Pro series targets outstanding thermal conductivity with exceptional compressibility so the pad conforms tightly to uneven surfaces under normal mounting pressure. Grey silicone-based compound fills microscopic gaps without pumping out over time. No electrical conduction means safe direct contact with PCB components.
Each 120 by 20 millimetre strip slides into narrow M.2 slots, between memory chips or along GPU voltage-regulator rows where thicker pads would not seat. The 1.0 millimetre profile clears low-profile heatsinks and backplates while still delivering Pro-level heat transfer. Two pieces cover multiple zones or spare replacements.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermal Grizzly |
| Model name | TG-MP-P-120-20-10-2 |
| Part number | TG-MP-P-120-20-10-2 |
Clean both surfaces, peel the protective film, place the 1.0 mm grey pad flat on the component, then press the heatsink down evenly so the pad compresses without trapping air bubbles.
The electrically non-conductive pad has no fixed service interval; replace it only when you disassemble the cooler or if temperatures rise noticeably after years of continuous operation.
The pad transfers heat until the attached heatsink or airflow becomes the bottleneck; its own conductivity stays constant while the cooling assembly saturates.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?