Shenzhen Aimilai Technology Co.Ltd. M.2 NVMe to PCIe x4 Adapter with Heatsink Gold Aluminum Black
- Gold
- Aluminum, Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
High-performance 8.0 W/mK thermal pad measuring 100x100x1.5mm for chipset and memory cooling
The Thermal Grizzly Minus Pad 8 is a high-performance thermal interface pad measuring 100 by 100 by 1.5 millimetres. It targets builders and technicians who need reliable heat transfer for memory modules, chipsets or voltage regulator zones. The ceramic-silicone compound with nano-aluminum oxide delivers a thermal conductivity of 8.0 W/mK. Its electrically insulating properties ensure safe application across exposed circuitry.
With an operating range from minus 100 to plus 250 degrees Celsius, the pad remains stable under heavy workloads and rapid thermal cycling. The material requires only slight pressure to conform to microscopic surface gaps, eliminating air pockets without mechanical fasteners. Zero moving parts mean completely silent operation and no power draw. RoHS compliance confirms the absence of restricted hazardous substances.
The 100 by 100 millimetre square sheet can be trimmed with scissors to fit irregular component layouts or multiple smaller dies. High compressibility allows the 1.5 millimetre thickness to adapt to varying stack heights across a single board. The tacky surface holds position during assembly without adhesive residue. Environmentally friendly composition supports disposal through standard electronics recycling channels.
Measured against everything we stock in RAM & Chipset Heatsinks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Cut the pad to size, peel both protective films, place it on the chipset or memory module, then apply even pressure — the common mistake is leaving one film on, which blocks the 8.0 W/mK conductivity.
The ceramic-silicone compound does not dry out or pump out; plan to replace it only when you disassemble the block or if the pad is physically torn during a future upgrade.
The pad stays stable up to +250 °C, so the practical limit is the component's own thermal throttle point — the pad itself will not degrade first.
More in RAM & Chipset Heatsinks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?