APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Distributes 16 A across 12 C13 and 2 C19 outlets from a C20 inlet in a 1U rack-mount cabinet
The Tripp Lite PDU12IEC is a basic 1U rack-mountable power distribution unit designed for network closets and server racks. It accepts worldwide 100-240 V single-phase input through an IEC-320 C20 inlet and delivers unfiltered pass-through power to fourteen outlets. The all-metal cabinet includes detachable flanges for flexible wallmount, under-counter or 0U cable-management installation.
This unit provides twelve IEC-320 C13 outlets and two IEC-320 C19 outlets on the front panel. The mixed receptacle layout supports a variety of server, switch and storage power cords without adapters. Input voltage range covers 100 V, 120 V, 208 V, 230 V and 240 V at 50 or 60 Hz nominal frequency.
A 16 A overload protection breaker covers the entire strip for continuous operation up to the rated current. Unfiltered electrical pass-through without a power switch makes the PDU suitable for distributing alternate-waveform UPS or generator power. The unit is tested to UL 60950-1 and CAN/CSA C22.2 No. 60950-1-03 standards for safe sustained use.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Tripp Lite |
| Model name | PDU12IEC |
| Product type | Basic |
| Display | |
| Front panel leds | 1U |
| Power | |
| Supply voltage | 100 V, 120 V, 208 V, 230 V, 240 V |
| Input current rating | 16A |
| Input connection | IEC-320 C20 |
| Voltage output | 100–240 V nominal, single phase |
| AC output frequency | 50/60 Hz |
| Output outlets | 12 IEC-C13 & 2 IEC-C19 |
| Overload protection | 16A |
| Size & build | |
| Rack height | 1U |
| Product dimensions | 1.75 in × 17.5 in × 4.25 in |
| Product weight | 3.2 lb (1.45 kg) |
| Shipping weight | 1.70 kg |
| Package size | 514 × 241 × 51 mm |
| Environment & compliance | |
| Certified standards | Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), CE (Europe) |
The unit can supply up to 16 A total across all 14 outlets, so the combined draw of connected servers and network gear must stay at or below that limit.
The IEC C20 inlet accepts a 16 A supply cord, so the PDU cannot draw more than 16 A from the upstream UPS, generator or wall circuit.
It occupies 1U (1.75 in) of a 19 in rack, and the detachable flanges also allow 0U, wall-mount or under-counter installation.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?