Tripp Lite PDUMH30AT Metered ATS PDU 25-Outlets 120V 30A 2U
A metered automatic transfer switch PDU with 25 outlets for 120 V 30 A rack power distribution
- 25 outlets power rack equipment efficiently
- dual NEMA L5-30P inputs enable automatic transfer switching
- metered display monitors 30A load in real time
- 2U horizontal design fits standard server racks
- TAA compliant for government procurement requirements
Metered ATS PDU with 25 outlets
The Tripp Lite PDUMH30AT is a metered automatic transfer switch power distribution unit built for 120 V AC environments. It accepts two NEMA L5-30P inputs and delivers power through 24 NEMA 5-15/20R and one NEMA L5-30R receptacles. The 2U horizontal chassis mounts in standard racks or on walls. Local metering shows real-time load in amps.
Suits dual-corded racks needing automatic failover
This unit targets administrators who require redundant power feeds with sub-cycle switching between sources. It fits installations where 30 A service and mixed 5-15/20R plus L5-30R outlets match the connected gear. Sites limited to 15 A or 20 A circuits, or those without dual input feeds, will not use the transfer function and should consider a single-input PDU instead.
30 A dual-input rating decides fit
The PDU draws up to 30 A per input at 100–127 V AC, so each feed must be protected by a 30 A breaker and wired with a NEMA L5-30P plug. If the available circuits are rated lower, or only one feed exists, the ATS capability cannot be used and the product will not match the infrastructure.
How it compares
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
- Price $621.99
- Pricier than about 61% of the 640 comparable items (median $458.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the dual NEMA L5-30P inputs work with my existing 30 A 120 V generator feed?
Yes, each input uses a NEMA L5-30P plug rated for 30 A at 120 V AC, matching a standard 30 A generator receptacle.
How can I confirm the automatic transfer switch is functioning after installation?
The front-panel digital meter displays real-time voltage and current; a smooth switchover between the two inputs without output interruption shows the ATS is operating correctly.
Which cords or adapters must I purchase separately to connect 24 standard servers and one locking device?
The unit provides 24 NEMA 5-15/20R outlets and one NEMA L5-30R outlet; you only need matching C13-to-5-15 cords for the servers and a C13-to-L5-30 cord for the locking device.
More in Rackmount PDUs
Similar items
APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
CyberPower PDU41021 1U Switched PDU 16 Outlets 12 ft 15A NEMA 5-15P
- 1U
- IPv4/v6, SNMPv1/v3,…
APC AP7731 Switched Rackmount PDU 30A NEMA L6-30P 8ft
- FCC Part 15 Class A…
- Switched
Vertiv MPH-ECV27NOXO30 PDU 27-Outlets 3.6kW Vertical
- Form Factor:Vertica…





