We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains 3950 100K Thermistor 1 m 2.54 mm 3 pcs

SKU CH-RMA1-TVY0Z MPN 3950

Pack of three NTC 3950 100K thermistors with 1 m PTFE-insulated leads and 2.54 mm connectors for 3D printer hot ends

  • Measures -40 °C to 300 °C for high-temp filament printing
  • ±1 % accuracy gives reliable temperature control
  • 1 m PTFE-insulated wire withstands hot-end heat
  • 54 mm pitch connector fits common printer boards
  • Pack of three thermistors covers spares or multi-extruder setups

Three-Pack Pre-Wired Thermistors

This pack contains three NTC 3950 thermistors, each with a 1 metre PTFE-insulated lead terminated by a 2.54 mm pitch black female two-pin connector. They are intended for temperature sensing in 3D printer hot ends and heated beds. The nominal resistance is 100K Ohm with a stated accuracy of ± 1%.

Makers Replacing or Upgrading Sensors

The parts suit anyone fitting a standard thermocouple-compatible heating block on a RepRap-style machine. Builders who need a different resistance curve, a smaller connector pitch, or a bare-bead sensor without a wired harness should look at other options.

100K Ohm Nominal Resistance

The single specification that decides fit is the 100K Ohm nominal resistance at the reference point; the controller firmware must be configured for this value. The sensor covers a range of -40 °C to +300 °C, making it suitable for high-temperature filaments.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 98% of the 5,852 comparable items (median $91.99).

New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameUnique Bargains

Questions about this item

What printer board header matches the 2.54 mm pin pitch on these thermistors?

The black female 2-pin connector has a 2.54 mm pitch, so it plugs directly into any control board header spaced at that same pitch.

Will the PTFE-insulated leads survive the 300 °C upper limit of the sensor?

Yes, the high-temperature PTFE wiring insulation is rated for the full -40 °C to +300 °C range specified for the thermistor.

How can I confirm the three units are within the stated ±1 % tolerance?

Measure each thermistor at a known reference temperature and verify the resistance falls within ±1 % of the expected 100K Ohm curve for a 3950 beta device.

More in Print & Scan Accessories

Similar items