Shenzhen Aimilai Technology Co.Ltd. M.2 NVMe to PCIe x4 Adapter with Heatsink Gold Aluminum Black
- Gold
- Aluminum, Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Set of ten aluminum heatsinks with pre-applied thermal adhesive tape for cooling small chips and stepper motor drivers
These 9 x 9 x 12 mm aluminium heatsinks are designed for cooling memory chips, stepper motor drivers and similar small components that lack factory cooling. The pack contains ten pieces, each with pre-applied thermal conductive adhesive tape for quick installation on clean, dry surfaces. They suit hobbyists and repair technicians adding passive cooling to 3D printer electronics or embedded boards. Builders needing larger surface areas or active fan mounts will need a different solution.
The heatsinks rely entirely on case or ambient airflow to dissipate heat; they do not move air themselves. Aluminium alloy construction spreads heat from the component into the 12 mm tall fins, but temperatures will rise without forced ventilation. The supplier recommends pairing them with a separate cooling fan, which is not included. No power draw or noise is generated by the heatsinks themselves, making them silent additions to any build.
Each heatsink ships with thermal conductive adhesive tape already attached, removing the need for separate thermal paste or pads. The tape provides both mechanical bond and thermal interface when pressed onto a cleaned chip surface. No additional brackets, clips or software are supplied; installation is purely mechanical. The ten-piece quantity covers multiple drivers or memory modules in a single purchase.
Measured against everything we stock in RAM & Chipset Heatsinks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
Clean and dry the chip surface, peel the backing from the tape, press the heatsink firmly in place, then add a cooling fan because the heatsinks need airflow to work.
The tape is pre-applied for the initial fit; if a heatsink is removed the tape loses grip and should be replaced with fresh thermal adhesive.
The small 9 x 9 mm footprint and reliance on external airflow mean thermal capacity saturates quickly without forced air over the fins.
More in RAM & Chipset Heatsinks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?