Clover Technologies Group, LLC CF064-67901-REF refurbished maintenance kit 225000 yield
- Printer Accessories
- Maintenance Kit
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pack of ten brass V6 nozzles with 0.6 mm bore for 1.75 mm filament, M6 thread and 7 mm thread length
This pack contains ten brass nozzles with a 0.6 mm orifice designed for V6 hot-ends using M6 threads. They suit hobbyists and small workshops printing standard non-abrasive filaments such as PLA, ABS or PCL. Each nozzle is stamped for quick identification and has a clean, well-formed thread to reduce leakage risk.
The M6 thread with a 7 mm length fits V6-style heater blocks only; other hot-end designs will not accept these nozzles. Brass construction limits use to non-abrasive materials because carbon-fibre or metal-filled filaments will wear the orifice quickly. The 0.6 mm bore offers a balance between detail and flow but cannot match the resolution of smaller diameters.
Confirm your printer uses a V6 hot-end with an M6 thread and accepts 1.75 mm filament before purchasing. After installation you must recalibrate the nozzle-to-bed distance to maintain print quality. Replacement requires heating the block to the filament temperature range and using a spanner to hold the block while unscrewing the old nozzle.
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
The listing supplies 10 brass nozzles in one pack, giving enough spares for multiple filament changes or worn tips on a V6 hot-end.
A 0.6 mm opening lays down wider lines than a standard 0.4 mm tip, so layers build faster and parts are stronger, though fine detail is reduced.
The M6 thread matches the V6 specification, and the brass body handles the recommended PLA range of 180-220 °C and ABS range of 240-280 °C.
More in Print & Scan Accessories
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?