Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Soft silicone pad fills gaps between heatsink and component for improved heat transfer at 1.5 W/m-K
This 100mm by 100mm silicone pad sits between a heatsink and a component to bridge uneven surfaces and improve thermal transfer. The blue pad has a thermal conductivity of 1.5 W/m-K and withstands temperatures from 50 to 200 degrees Celsius. Its low-hardness construction provides damping and cushioning while maintaining good compression. The sheet is .5mm thick and sold individually.
Before ordering, measure the exact gap height between your heatsink and the target component to confirm that a .5mm pad matches the required clearance. Check that the 100mm by 100mm sheet is large enough for the contact area or can be trimmed without waste. Ensure the mating surfaces are clean and free of old compound so the pad makes full contact.
Each pad ships with a plastic protective film that must be removed before installation. No additional tools, adhesives or software are included in the package. The installer simply peels the film, positions the pad on the cleaned surface, and mounts the heatsink. No curing time or re-application schedule is needed.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
The package contains one 100 mm x 100 mm x 0.5 mm blue silicone thermal pad. No extra items are included; you only need to clean the component surfaces before applying the pad.
Choose the 0.5 mm thickness when the gap between the heatsink and component measures about half a millimetre, and the 1.5 W/m-K conductivity suits general-purpose CPU or GPU heat transfer.
It indicates the pad will conduct heat at 1.5 watts per metre-kelvin, bridging uneven surfaces and improving thermal transfer to the heatsink within the 50 to 200 °C operating range.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?