Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Soft silicone thermal pads fill gaps between heatsinks and components to improve heat transfer at 1.5 W/m·K conductivity
These Unique-Bargains silicone pads measure 100 mm by 100 mm by 2 mm and come in a pack of two. They sit between a heatsink and a component to bridge uneven surfaces and improve thermal transfer. The gray pads are rated at 1.5 W/m-K conductivity and withstand temperatures from 50 to 200. Builders who need a soft, compressible interface material for custom cooling setups will find them useful.
The low-hardness silicone compresses easily, providing damping and cushioning while conforming to irregular gaps. Installation requires only a clean surface, removal of the protective film, and placement of the pad where needed. No curing time or paste application is involved, so the pads free up workflow steps compared to liquid compounds. They suit one-off repairs or small-batch assembly where precise thickness matters.
These pads replace dried or missing thermal interfaces on memory modules, VRM heatsinks, or small-chip coolers where a 2 mm gap exists. The jump is worth it when the original material has degraded or when a thicker pad is required to make contact across uneven surfaces. They are not for buyers who need higher conductivity than 1.5 W/m-K or a different thickness for their specific assembly.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Unique Bargains |
The pads withstand temperatures from 50 to 200 degrees Celsius, so sustained loads must stay within that range.
Being passive gap fillers, they generate no heat and consume no power; they simply conduct heat toward the heatsink.
You need a heatsink or cooler and the target device such as a CPU, GPU or chipset, plus a clean mounting surface.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?