UPSIREN UX PRO Ultra 16.8 W/mK thermal putty 20g
High-conductivity 16.8 W/mK thermal putty replaces pads up to 3 mm thick on GPUs and memory, operates from -50 to 200 °C and withstands 250 °C peaks
- Net content20g
- Continuous-use temperature-50 to 200 °C
Weight 20g
- 20g$20.99
- 200g$115.99
- 50 g$37.99
- High thermal conductivity of 16.8 W/m·K for efficient heat transfer
- Replaces thermal pads up to 3 mm thick with a single putty layer
- Non‑electrically conductive formula prevents short circuits on sensitive components
- Stable performance from –50 °C to 200 °C for long‑term reliability
- 20 g syringe provides enough material for multiple GPU or memory applications
High-conductivity thermal putty for GPU and memory
UPSIREN UX PRO Ultra is a 20 g syringe of sticky thermal compound rated at 16.8 W/m·K. It is formulated to replace soft thermal pads up to 3 mm thick on graphics cards, memory modules and similar components. The material is non-electrically conductive and cures fully without oil bleed. Operating range spans -50 °C to 200 °C with short-term tolerance to 250 °C.
Suited for enthusiasts replacing thick pads
Builders who need a conformable, high-conductivity interface for GPU dies, VRAM or VRM areas will benefit from the putty's tack and compression performance. It is not intended for users who require a traditional low-viscosity paste for thin CPU spreads, nor for applications needing a pre-cut pad with fixed thickness and no manual shaping.
20 g volume covers multiple GPU repastes
The 20 g syringe provides enough material for several graphics-card memory and core applications, including larger dies and surrounding VRAM arrays. Coverage diminishes when filling gaps approaching the 3 mm replacement limit or when coating extensive VRM heatsink arrays across multiple cards.
How it compares
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 75% of the 498 comparable items (median $12.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Net content | 20g |
| Environment & compliance | |
| Continuous-use temperature | -50 to 200 °C |
Other versions of this model
2 more in the same range
UPSIREN UX PRO Ultra 16.8 W/mK Thermal Putty 20 g
- 20g
- -50 to 200 °C
Questions about this item
What graphics card or memory module must I already have for this 20 g putty to replace a pad up to 3 mm thick?
Any GPU or memory chip that currently uses a soft thermal pad up to 3 mm thick can be serviced with this putty; the 20 g syringe covers multiple such components.
Will the 16.8 W/m·K conductivity still help if I keep an older heatsink that previously used standard pads?
Yes, the putty’s conductivity is at least three times higher than typical pads, so it improves heat transfer even with an older heatsink.
How can I confirm the putty is performing correctly after I apply it to the GPU die?
Monitor GPU core and memory temperatures under load; they should stay within the -50 °C to 200 °C operating range and show lower peaks than with the previous pad.
More in Thermal Paste
Similar items
Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
Noctua NT-H2 3.5g thermal paste with cleaning wipes
- Premium-grade therm…
- Not electrically co…
ARCTIC COOLING ACTCP00002B MX-4 4 g thermal paste
- 4.0g
- 8.5 W/mK
Prolimatech PRO-PK3-5G thermal paste 5 g
- Material Specificat…
- High Thermal Conduc…







