APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Maintenance bypass PDU delivering 120 V to eight NEMA 5-20R outlets at 24 A with integrated 10 ft and 6 ft input cords
The Vertiv MP2-130C is a switched power distribution unit that provides maintenance bypass for single-phase UPS systems. It accepts 120 V input through three NEMA L5-30 connectors and supplies eight NEMA 5-20R outlets. Integrated 10 ft and 6 ft cords connect the unit to both utility and UPS sources. A rotary switch and LED indicators show the active power path.
This unit suits administrators who must service or replace a UPS while keeping connected equipment powered. It fits a standard 17" rack with the included brackets and operates from 32 °F to 104 °F at up to 95 % non-condensing humidity. Sites that do not require maintenance-bypass capability or that use a different input voltage should select another power distribution solution.
The 24 A rating determines the total load the PDU can pass to attached devices. Exceeding this limit will trip the upstream protection and interrupt power. Verify that the combined draw of all connected equipment stays at or below 24 A before installation.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Liebert |
| Model name | MP2-130C |
| Product type | Switched |
| Power | |
| Supply voltage | 120 V |
| Input line frequency | 50/60 Hz |
| Input current rating | 24 A |
| Input connection | 3 x power NEMA L5-30 |
| Voltage output | 120 V |
| Output outlets | 8 x power NEMA 5-20 |
| Size & build | |
| Rack mounting kit | Included |
| Cord length | 1 x power cable - integrated - 10 ft 1 x power cable - integrated - 6 ft |
| Product dimensions | 17 in × 3.5 in × 3.5 in |
| Shipping weight | 5.90 kg |
| Package size | 432 × 89 × 89 mm |
| Environment & compliance | |
| Operating conditions | 32 degree F to 104 degree F |
| Storage relative humidity | Up to 95% (non-condensing) |
It mounts in a standard 17 inch wide rack and occupies 3.5 inches of vertical space (2U).
Plug the two integrated cords — one 10 ft and one 6 ft — into the UPS output and the wall receptacle, then secure each NEMA L5-30 plug so it cannot pull loose.
Operate the switch through its full rotation at least once per year to prevent contact oxidation and verify the LED indicators still show the correct power path.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?