Vszerda 10-way 4-pin PWM fan hub SATA cable
A 10-way 4-pin PWM fan hub powered by SATA with adhesive backing for tidy cable management
- Connect 10 fans from one header
- PWM signal passed through for temperature control
- SATA power feeds fans directly off PSU
- Adhesive back mounts hub securely in case
- Dedicated CPU-fan header plus regular PWM ports
10-way PWM fan hub for SATA-powered builds
This Vszerda hub splits a single motherboard PWM header into ten 4-pin fan connections while drawing operating power from a SATA connector on the PSU. It is designed for water-cooling loops or air-cooled cases that need more fan headers than the board provides.
Check motherboard PWM header and PSU SATA connector
Verify that your motherboard has a 4-pin PWM CPU fan header for the control signal and that your power supply offers a free SATA power plug. The hub’s red port is dedicated to the CPU fan link, while the ten black ports accept standard PWM fans.
Replaces daisy-chain splitters when header count
Use this adapter instead of multiple Y-cables when you have run out of motherboard fan headers but still have SATA power available. The jump is worthwhile once you exceed the board’s native header count and want centralised PWM control without loading the motherboard’s power traces.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the hub include the SATA power cable or must it be purchased separately?
The hub has a built-in SATA power connector that plugs directly into the power supply, so no separate cable is required.
How many 4-pin PWM fans can this single hub support?
It splits one motherboard PWM header into 10 4-pin fan connectors, allowing 10 fans to run simultaneously.
Will the motherboard still control fan speeds through the PWM signal when all 10 ports are populated?
Yes, the red port passes the motherboard PWM signal to all connected fans while the SATA connector supplies power independently.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
CableCreation Mini SAS SFF-8087 to Right Angle SFF-8087 Cable 2.5FT
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
KEHIPI E55 SATA to USB 3.0 Adapter Cable 9 Inches Grey
- Usb a 3.0
- Male-to-Male





