Vszerda 12VHPWR 12+4 Pin 180° STD Black internal power cable
Angled 12+4-pin power adapter supports 600 W delivery and fits 180-degree layouts with 26 mm clearance for 40-series graphics cards
- 180-degree angle connector enables compact builds in tight spaces
- Strengthened PCB design eliminates wire bending for reliable terminal contact
- Supports 600W output with aluminum heat sink and ventilation holes for thermal stability
- High-quality alloy copper terminals ensure stable conductivity under high loads
- Requires minimum 26mm clearance between side panel and graphics card
12VHPWR 180° STD Black Adapter
This Vszerda internal power cable is a 12VHPWR 12+4 pin adapter with a 180-degree STD connector finished in black. It is designed for builders who need to connect an ATX 3.0 power supply to a compatible graphics card while routing the cable flat against the PCB.
Fits tight clearances above 26 mm; not for 90° needs
The adapter suits systems where the side panel sits more than 26 mm from the graphics card and a straight-out cable would prevent closure. Buyers who need a 90-degree bend direction or an RVS pin orientation should look at a different variant.
600 W rated with aluminium heatsink
The single specification that decides fitment is the 600 W current rating backed by an integrated aluminium heatsink and ventilation holes. If your build demands more than 600 W through the 12VHPWR connection, this adapter will not meet the requirement.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 60% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 600 W rating mean once the adapter is installed in a build?
The adapter is rated for 600 W continuous output and uses an aluminium heatsink with ventilation holes to keep temperatures stable under sustained high-current load.
How does the 12VHPWR 12+4 pin connector and 180° STD orientation affect compatibility?
The 180° STD angle routes the cable straight back from the card, reducing protrusion so the side panel can close when at least 26 mm of clearance exists between the panel and the graphics card.
What physical space is needed for the adapter to fit and mount properly?
A minimum 26 mm gap between the case side panel and the graphics card is required for the 180° STD adapter to sit without bending the cable or preventing the panel from closing.
More in Internal PSU & Riser Cables
Similar items
Shenzhen Aimilai Technology Co.Ltd. PCIe 3.0 4X Extension Cable 20cm 24cm
- Black
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





