Vszerda 12VHPWR 12+4 Pin 90° Angle Adapter 600W Black
90-degree angled 12VHPWR adapter routes power cables close to the graphics card for cases with at least 26 mm clearance and supports 600 W delivery
- Strengthened PCB design prevents wire bending and ensures full terminal contact
- Fits builds with over 26 mm clearance between side panel and graphics card
- Alloy copper terminals deliver stable conductivity under sustained high-load operation
- Aluminium heat sink with ventilation holes supports 600 W continuous power delivery
- 90-degree STD connector routes power cable close to the card for tidy cable management
12VHPWR 90° Adapter for 40 Series
This Vszerda 12VHPWR 12+4 Pin adapter provides a 90-degree angled connection for 40 series graphics cards. The strengthened PCB design avoids wire bending and ensures full terminal contact. It supports 600W output with an aluminium heat sink and ventilation holes.
Clearance Solution for Tight Cases
Builders who cannot close their side panel because the power cable protrudes too far will benefit from this adapter; a minimum 26mm gap between the side plate and the graphics card is required. Users with ample clearance or who prefer a straight cable run should look elsewhere.
12VHPWR 12+4 Pin Connector Standard
The single specification that decides compatibility is the 12VHPWR 12+4 pin interface on the graphics card. This model is the STD type with a 90-degree angle; the RVS type or 180-degree version will not fit the same orientation.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 60% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What clearance do I need between the side panel and the graphics card for the 90-degree STD adapter?
You need more than 26 mm between the side plate and the graphics card for this 90-degree STD type adapter to fit.
How do I install the 12VHPWR 12+4 pin 90-degree adapter and what step is often missed?
Plug the adapter into the graphics card 12VHPWR socket first, then connect your PSU cable; the step often missed is verifying the STD orientation matches your card before seating it fully.
What maintenance or replacement will the 600 W alloy-copper terminal adapter need later?
Periodically check that the alloy copper terminals stay clean and fully seated; the aluminium heatsink and ventilation holes handle heat, so no scheduled replacement is required unless physical damage occurs.
More in Internal PSU & Riser Cables
Similar items
Shenzhen Aimilai Technology Co.Ltd. PCIe 3.0 4X Extension Cable 20cm 24cm
- Black
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





