Vszerda 12VHPWR 90 Degree Adapter Type B 16 Pin 600W internal power cable
A 90-degree Type B adapter connects a 12VHPWR 16-pin cable to RTX 3090 Ti, 4070 Ti, 4080 or 4090 graphics cards while supporting up to 600 W
- Right-angle design adds 11 mm clearance for tight cases
- 16-pin 12VHPWR connector supports 600 W power delivery
- 12 oz copper PCB improves heat dissipation under load
- ATX 3.0 PCIe 5.0 compatible with RTX 3090 4070 4080 4090
- Type B orientation matches specific GPU port layouts
90 Degree 12VHPWR Adapter for RTX Cards
This 16-pin Type B adapter connects an ATX 3.0 PCIe 5.0 12+4pin cable to compatible GeForce RTX 3090 Ti 4070 Ti 4080 4090 graphics cards. The right-angle design reduces strain on the GPU input port and cable. It adds only 11mm of clearance from the card edge.
600W Rating with 12oz Copper PCB
The adapter supports up to 600W power delivery when paired with a 600W-rated source cable. A 12oz copper PCB layer acts as a heatsink to manage thermal load. It handles the full specification for supported RTX models. Insufficient source cable rating will limit safe operation.
Replaces Straight 12VHPWR Connectors
Builders upgrading from a straight 12+4pin plug gain side-panel clearance for wide cards in narrow chassis. The 90-degree orientation prevents cable wear at the GPU port. It is not for cards with a different 12VHPWR keying or orientation than Type B.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 61% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 12VHPWR 90 degree Type B adapter fit alongside my existing RTX 3090 Ti power cables in a tight case?
The right-angle design adds only 11 mm of clearance from the graphics card, letting the original cable route cleanly toward the side panel even in narrow chassis.
How can I confirm the 16-pin 12+4 connector is seated correctly after installing the adapter on my RTX 4080?
Push the adapter until the latch clicks and the 90-degree elbow sits flush against the GPU shroud; the short 11 mm profile leaves no gap for partial insertion.
Does the package include a 12VHPWR power cable or only the Type B 90-degree adapter for my RTX 4090?
Only the 16-pin 90-degree adapter (Type B) is supplied; you must use your PSU’s native 12VHPWR cable or a compatible 600 W PCIe 5.0 cable.
More in Internal PSU & Riser Cables
Similar items
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
GELID SOLUTIONS CA-PWM-03 1-to-4 4pin PWM Fan Power Splitter internal power cable
- 1.37 ft (0.42 m)
- Cable Kits





