Vszerda 16 Way ARGB PWM Hub SATA 15 Pin Black
A 16-way hub combining 5 V 3-pin ARGB and 12 V 4-pin PWM fan headers, powered by dual SATA 15-pin connectors to extend motherboard interfaces and synchronise lighting across all connected devices
- Connect 16 fans and 16 ARGB devices simultaneously
- Dual SATA 15-pin power reduces motherboard load
- Automatic motherboard ARGB sync when 3-pin cable connected
- Built-in chipset runs 16 lighting effects without motherboard support
- Magnetic standoffs and PMMA case for secure chassis mounting
16-Way ARGB and PWM Hub
The Vszerda hub combines a 12 V 4-pin PWM fan controller and a 5 V 3-pin addressable RGB controller in one unit. It provides sixteen PWM ports and sixteen ARGB ports powered by dual SATA 15-pin connectors. The magnetic standoffs and PMMA case allow secure mounting inside a steel chassis.
Sustained Load Behaviour
Powered directly from the PSU via SATA, the hub removes the current draw from the motherboard headers during continuous operation. All sixteen fans can start simultaneously while the ARGB lighting stays synchronised across every connected device. The onboard controller chip runs up to sixteen lighting effects automatically if the motherboard lacks ARGB support.
Compatibility Check
Verify that your power supply has two free SATA 15-pin cables for the dual power input. Confirm that your ARGB devices use 5 V 3-pin addressable headers; connecting 12 V RGB components will cause damage. Ensure the motherboard has a 5 V 3-pin ARGB header if you want automatic sync, otherwise the hub runs its built-in effects independently.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 60% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the hub generate noticeable heat or noise when 16 fans and ARGB devices run all day?
The hub is a passive splitter with no active cooling; it draws power from dual SATA 15-pin connectors and adds no audible noise.
What must I already have inside the case to power and control this 16-way hub?
You need a PSU with two free SATA 15-pin cables and a motherboard 5 V 3-pin ARGB header plus a 12 V 4-pin PWM header for sync and speed control.
Will my older 12 V 4-pin RGB strips work safely with the 5 V 3-pin ARGB ports on this hub?
No, the ARGB ports are 5 V 3-pin addressable only; connecting 12 V RGB components can damage them.
More in Internal PSU & Riser Cables
Similar items
Shenzhen Aimilai Technology Co.Ltd. PCIe 3.0 4X Extension Cable 20cm 24cm
- Black
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





