Vszerda 1M Mini SAS SFF-8087 to 4x SAS 29pin SFF-8482 Cable w/ Molex 4pin Power
Connects a Mini SAS SFF-8087 controller to four SAS SFF-8482 drives with integrated Molex power
- Connect RAID controller to four SAS drives via SFF-8087 host
- Each SFF-8482 target delivers data and power in one connector
- 3 ft length fits typical server chassis layouts
- Integrated Molex 4-pin power simplifies drive identification
- Compatible with LSI 9207-8i, Adaptec 6405E and HP P410 controllers
Internal SAS fan-out cable
This 3.3ft cable connects a Mini SAS SFF-8087 host controller to four SAS hard drives using SFF-8482 connectors. It is built for storage administrators expanding a SAN or DAS array with a forward fan-out design. Each of the four target connections carries both data and power through the integrated Molex 4-pin leads. The 36-pin host side plugs directly into compatible RAID or HBA cards.
Sustained drive connectivity
The cable maintains a continuous link between the controller and each attached drive during extended rebuilds, backups or parity checks. Molded strain relief on the 29-pin and 36-pin ends resists signal degradation when the chassis vibrates under heavy spindle activity. Separate Molex feeds let the power supply deliver current to every drive without daisy-chain voltage drop. This construction supports reliable throughput for multi-drive workloads.
Verify controller and backplane match
Confirm your RAID or HBA card presents a Mini SAS SFF-8087 port before ordering. The target backplane or drive cage must accept four discrete SFF-8482 29-pin connectors with combined data and power. Ensure the power supply has four free Molex 4-pin leads for the integrated power tails. Cable routing space of 3.3ft between the controller slot and the drive bays is required.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 1 m cable run hot or draw noticeable power when all four SFF-8482 drives are active all day?
The cable is passive copper with no active electronics, so it generates no heat and draws no power of its own; only the drives and the Molex-fed backplane consume power.
Which host connector must my controller card provide for the SFF-8087 end to plug in?
The host side requires a 36-pin SFF-8087 Mini SAS port, found on cards such as the LSI 9207-8i, Adaptec 6405E or HP Smart Array P410.
Can I keep my older SAS drives that use the 29-pin SFF-8482 interface while using this cable?
Yes, each of the four breakout ends is a 29-pin SFF-8482 connector that carries both data and power for legacy SAS drives.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1RR-10P SATA cable 1 m right angle 10 pack
- 3.28 ft (1m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
JSAUX JSUKNZUC2SAGY1P SATA to USB C Cable 5Gbps Grey
- 5 Gbit/s
- Male-to-Male
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
HETAI Digital Technology Co.,Ltd USB 3.0 to SATA Cable 2.5 inch 200mm Black
- Micro USB to USB A





