Vszerda 2-in-1 PWM ARGB Controller Hub 8 Ports PMMA Case Magnetic Standoff 12V 5V IR Remote
An ARGB and PWM hub managing eight 5 V addressable RGB strips and eight 12 V 4-pin fans, with IR remote fallback and magnetic PMMA mounting
- Controls 8 PWM fans and 8 ARGB devices from one hub
- Syncs up to 8 ARGB strips via motherboard 5 V header
- IR remote manages lighting when motherboard lacks ARGB support
- Magnetic standoffs secure hub inside chassis without tools
- PMMA case shields circuitry while keeping layout visible
2-in-1 PWM ARGB Hub
This Vszerda controller hub combines eight 12 V PWM fan headers and eight 5 V ARGB connectors in a single unit. A magnetic standoff and PMMA case let you secure the board inside the chassis without tools. It is designed for builders who want centralised fan and lighting management.
Suits 5 V ARGB ecosystems only
The hub synchronises up to eight addressable RGB devices through a motherboard header or the supplied IR remote when the board lacks ARGB control. It does not support 12 V RGB components, so owners of older four-pin RGB strips must look elsewhere.
Eight fans and eight light strips
Each PWM channel delivers 12 V power to a 4-pin fan while the ARGB side drives 5 V addressable LEDs. The included 1.3 ft motherboard cables connect the hub to PWM and ARGB headers. Headroom ends at eight devices per type; larger loops need a second hub.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 60% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the hub need a free 12 V 4-pin PWM header on the motherboard to power its eight fan ports?
Yes, the hub draws fan power through a 12 V 4-pin PWM connection to the motherboard, so one such header must be available.
Can I keep my existing 12 V RGB strips and control them through the hub's IR remote?
No, the hub only supports 5 V AURA addressable RGB devices; 12 V RGB components will not work.
How do I confirm the hub is correctly reporting fan speeds to the motherboard after installation?
Connect the included 1.3 FT PWM feedback cable to a motherboard fan header, then check that each attached fan shows an RPM reading in BIOS or monitoring software.
More in Internal PSU & Riser Cables
Similar items
Shenzhen Aimilai Technology Co.Ltd. PCIe 3.0 4X Extension Cable 20cm 24cm
- Black
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





