Vszerda 2-Pack Mini-SAS SFF-8087 to 4 SATA 90° Cable 0.5m
A 2-pack of 0.5 m Mini-SAS SFF-8087 to four 90-degree SATA breakout cables for connecting a SAS controller to four drives at 6 Gb/s each
- Rated speed6 GB/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack/Blue
- Overall length1.6
- Key featuresSFF-8087 to 4x SATA 90 Degree
- Connect four drives from one controller
- SFF-8087 host to four SATA targets
- 90-degree right-angle plugs ease tight routing
- 6 Gbps per drive data transfer rate
- 30 AWG braided cables simplify cable management
What this cable set connects
This two-pack provides Mini-SAS SFF-8087 male to four SATA 7-pin female right-angle breakout cables. Each 0.5 m assembly links a SAS HBA or RAID controller to up to four SATA hard drives or SSDs, supporting 6 Gbps per drive for storage expansion in servers or workstations.
Who should use these and who should not
Builders adding SATA drives to a Mini-SAS 36-pin host port will find the labelled, 90-degree connectors simplify routing in tight chassis. Buyers whose backplane presents a Mini-SAS target connector cannot use this host-to-target cable; they need a reverse breakout instead.
Capacity and headroom
Four SATA targets per cable run at up to 6 Gbps each, so a single pair handles eight drives with aggregate bandwidth limited by the controller. The 30 AWG conductors and braided sleeving keep the 0.5 m length flexible, but longer runs or 12 Gbps SAS drives will require a different cable specification.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $23.99
- Pricier than about 81% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | DC-0036 |
| Product type | Mini-SAS Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What controller interface is required on my motherboard or HBA to use the SFF-8087 male connector?
The host side uses a 36-pin SFF-8087 male connector that plugs into a SAS HBA, RAID controller or motherboard Mini-SAS port.
Will the 90-degree SATA plugs work with drives mounted in a standard backplane?
The right-angle SATA connectors are designed for forward breakout to drives or backplanes; the cable is labelled for easier routing.
How can I verify each drive is running at the rated 6 Gb/s link speed after installation?
Check the negotiated link speed in your controller BIOS or OS disk utility; each SATA target should report 6 Gb/s.
More in SATA & eSATA Drive Cables
Similar items
2-Power SATA to USB 3.0 Adapter with 12V 2A Power Supply (Red)
- 5 Gbit/s
- Red
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BUCIER PCIe 2.0 to 2-Port SATA 3.0 Card with Low-Profile Bracket and Cables
- Copper





