Vszerda 2-pack SATA to 3× fan adapter cable 11" black braided
Splits one SATA power connector into three 3-pin or 4-pin fan headers, 11 inches long with black braided sleeving
- Connector details15 Pin Sata to 3 × 3 Pin / 4 Pin Pmw
- Connector genderMale-to-Male
- Product typeSATA
- Product colorBlack
- Key featuresBraided
- Power three fans from one SATA port with 15-pin male connector
- Braided black sleeving insulates cables and keeps build tidy
- 11-inch length helps route and hide wires inside case
- Works with both 3-pin and 4-pin PWM fan connectors
- Two adapters included for multi-fan cooling setups
Two SATA-to-three-fan adapters
This pack contains two cables that each convert one 15-pin SATA power connector into three 3-pin or 4-pin fan headers. Builders with limited motherboard fan headers can run multiple chassis fans from a single power-supply lead. The adapters suit any 12 V case fan that uses a standard 3-pin or 4-pin plug.
Three fans per cable at fixed 12 V
Each splitter delivers full 12 V to all three outputs with no speed-control circuitry, so connected fans run at their maximum rated RPM. The arrangement works well for constant-airflow cooling loops or radiator fans that do not need PWM regulation. It cannot throttle fan speed, so noise-sensitive builds should look elsewhere.
11-inch braided cables with all-black connectors
The 27 cm length including connectors helps route wires behind motherboard trays for a clean interior. High-density black sleeving protects the conductors and resists abrasion during installation. Male-to-male terminals plug directly into the power supply and fans without extra adapters.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | YSIUENG |
| Model name | RM |
| Product type | SATA |
| Product color | Black |
| Ports & slots | |
| Connector details | 15 Pin Sata to 3 × 3 Pin / 4 Pin Pmw |
| Connector gender | Male-to-Male |
Questions about this item
Can the 15-pin SATA connector power three 12 V fans on an older PSU that only has SATA power leads?
Yes, each adapter takes one 15-pin SATA plug from the PSU and splits it to three 3-pin or 4-pin fan connectors, delivering 12 V to all three fans.
How do I confirm the fans are running at full speed once the adapter is connected?
The adapter has no speed-control circuitry, so fans run at 12 V constantly; check fan RPM in BIOS or monitoring software to verify they are spinning at their rated maximum.
What comes in the pack and do I need any extra cables to use it?
The box contains two braided 11-inch Y-splitter cables, each with a 15-pin SATA male plug and three 3/4-pin male fan plugs; no additional cables are required if your PSU has spare SATA power connectors.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





