Vszerda 2-Pack SFF-8643 to 4x SATA Cable 1.6FT/0.5M
Two-pack of 1.6 ft Mini SAS SFF-8643 to four SATA cables for connecting controllers to drives
- Connect four SATA drives to one Mini SAS SFF-8643 controller port
- 5 metre cable keeps internal routing tidy
- SFF-8643 connector supports higher port density for future 14 Gb speeds
- 30 AWG conductors deliver reliable Serial Attached SCSI throughput
- Latching Mini SAS plug secures connection to RAID card or motherboard
Two-Pack SFF-8643 to 4x SATA Cable
This Vszerda two-pack provides two internal cables that convert a single Mini SAS SFF-8643 host port into four standard SATA device connections. Each cable measures 1.6 feet (0.5 m) and uses 30 AWG conductors in a black and blue sheath. The SFF-8643 plug features a latch for secure attachment to a motherboard or RAID controller.
For RAID controller or HBA expansion
These cables suit builders adding SATA hard drives or SSDs to a controller or motherboard equipped with SFF-8643 ports. They do not work with SFF-8645 backplane connectors, so systems using that interface need a different cable. The short 0.5 m length fits compact chassis but cannot reach distant drive bays in full-tower cases.
SFF-8643 host interface requirement
The decisive specification is the SFF-8643 host connector; the cable only functions when the controller or motherboard presents this exact Mini SAS interface. Verify the port type before purchase, as SFF-8645 or other Mini SAS variants are physically incompatible.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $27.99
- Pricier than about 86% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the 2-pack and do I need anything else to connect four SATA drives?
The pack includes two SFF-8643 to 4x SATA cables, each with a latched Mini SAS plug on the host side and four SATA female ports on the drive side; no extra adapters are required for a direct controller-to-drive link.
The listing mentions SFF-8643 and warns against SFF-8645 — how do I know which one my controller uses?
Check the controller or motherboard specification for a Mini SAS port labelled SFF-8643; if the port is keyed for SFF-8645 this cable will not mate, so verify the exact connector type before ordering.
The highlights cite 14 Gb capability — what does that mean for actual drive throughput?
The cable supports SAS signalling up to 14 Gb per lane, so each attached SATA drive can run at its native 6 Gb/s rate without the cable becoming a bottleneck.
More in SATA & eSATA Drive Cables
Similar items
BUCIER USB-C to eSATA Adapter Cable 5Gbps 3 ft
- USB Type C
- Male-to-Male
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BUCIER SFF-8643 to 4 SATA breakout cable 3.3FT 2-pack
- Sata
- SAS to SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





