Vszerda 2 Port SATA to eSATAp Bracket Card
Converts two internal SATA ports into external eSATAp connectors delivering 12V and 5V power plus USB 2.0 data up to 480 Mbps
- Adds two external eSATAp ports from internal SATA
- Supplies 12V and 5V power over eSATA for drives
- Enables USB 2.0 data up to 480 Mbps via 9-pin header
- Powered by SATA 15-pin from PSU with included adapter
- Plug-and-play expansion with no driver installation required
Two-Port eSATAp Expansion for Desktops
This bracket card adds two external eSATAp ports to a desktop by converting internal SATA connections. It suits builders who want to attach eSATA or USB 2.0 storage without opening the case each time. The board draws 12 V and 5 V power from a SATA 15-pin connector so attached 2.5" or 3.5" drives receive power directly from the port. No driver installation is required for operation.
Full-Height Bracket with Dual Headers
A standard full-profile bracket secures the card in a rear expansion slot. Two internal SATA 7-pin cables (sold separately) link the board to the motherboard or controller. A 9-pin USB header cable must be plugged into the motherboard for USB 2.0 data transfer up to 480 Mbps. The included SATA 15-pin to 4-pin adapter connects to the PSU to enable the 11-pin combo ports’ power-output capability.
Verify Headers and Cables Before Buying
Your motherboard needs a free USB 9-pin header and at least two SATA ports for the required cables. The power adapter must reach the PSU, so check cable routing space inside the chassis. Builders using only eSATA devices without USB still need the header connected for the combo ports to function. Systems lacking spare SATA ports or a USB header cannot use this card.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What data rate does the USB 2.0 part of the eSATAp port deliver?
The USB 2.0 channel runs at up to 480 Mbps when the 9‑pin header is connected to the motherboard.
What internal connectors and cables are required to make the bracket work?
Two SATA 7‑pin data cables, a SATA 15‑pin to SP4 4‑pin power adapter from the PSU, and a USB 9‑pin header cable to the motherboard are all mandatory.
How is the card installed and which step is often missed?
Fit the full‑profile bracket into a rear slot, connect the two SATA data cables to the motherboard, plug the power adapter into the PSU, and attach the USB 9‑pin header — omitting the header disables USB 2.0.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





