Vszerda 2Pack Mini-SAS SFF-8087 to 4x SFF-8482 SAS Cable 0.5M with SATA Power Adapter
Two-pack of 0.5 m Mini-SAS SFF-8087 to four SFF-8482 breakout cables with integrated SATA power adapters for 6 Gb/s drive connections
- Rated speed6 Gbit/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack/Blue
- Overall length1.6
- Key featuresSFF-8087 to SAS 0.5M
- Connect up to four drives per cable using SFF-8087 to 4× SFF-8482 breakout
- Each SFF-8482 connector includes SATA 7-pin data and 15-pin power adapter
- 6 Gbps per drive transfer rate over 0.5 m copper conductors
- 30 AWG flexible cables simplify routing inside the chassis
- Two-cable pack provides eight total SFF-8482 connections for storage expansion
Two-pack internal SAS breakout cables
This two-pack provides two 0.5 metre Mini-SAS SFF-8087 to 4x SFF-8482 breakout cables for connecting a SAS HBA or RAID controller to four SAS or SATA hard drives. Each cable is designed for internal storage expansion in servers or workstations. The host end uses a 36-pin SFF-8087 male connector while each target end presents an SFF-8482 connector.
SATA power adapter integrated per drive
Every SFF-8482 connector includes a built-in SATA 7-pin data and 15-pin power adapter so each attached drive receives both signal and power from a single breakout lead. The cables are labelled to simplify routing and cable management inside the chassis. A separate SATA power supply cable must be attached to each adapter connector for the drives to operate.
6 Gb/s per drive transfer rate
The assembly supports a data transfer rate up to 6 Gb/s per connected drive using 30 AWG copper conductors. Note that the SFF-8087 host connector must attach to the controller side and not to a backplane; the breakout will not function if connected in reverse.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $30.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | Mini SAS-009 |
| Product type | Mini-SAS Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Will the SATA 15-pin power adapters on the 4x SFF-8482 connectors need periodic replacement?
The adapters are passive copper assemblies rated for 6 Gb/s; they have no moving parts or active electronics, so no scheduled replacement is required under normal use.
What throughput ceiling appears first when the 0.5 m SFF-8087 link runs continuously at 6 Gb/s per drive?
Each SFF-8482 breakout is specified at 6 Gb/s, so the per-drive SAS 6 Gb/s signalling rate is the limiting factor before cable length or conductor gauge becomes a bottleneck.
How much heat or noise does the 30 AWG copper cable assembly produce during all-day operation?
The cable is a passive 30 AWG copper assembly with no active components, so it generates negligible heat and zero audible noise regardless of duty cycle.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Shenzhen Lianrui Information Technology SFF-8643 to SFF-8639 SATA Cable 80CM
- 80CM (2.6 ft)
- SFF-8643 to SFF-863…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
j5create JUH377 USB 3.0 7-Port Hub 3 ft
- 3 ft (0.91 m)
- Male to Female





