Vszerda 5.25" Front Panel Card Reader USB 3.0 Type-C eSATA Adapter
A 5.25" front-panel hub adds three USB 3.0 ports, one USB 3.1 Type-C port and six card slots for CF, MD, XD, MMC, TF, M2 and MS media
- Read CF, MD, XD, MMC, TF, M2 and MS cards from one bay
- Front USB 3.0 and 3.1 Type-C ports deliver up to 500 MB/s
- Fits a standard 5.25" drive bay with no driver needed
- LED indicator shows card activity at a glance
- ABS plastic front panel resists wear in daily use
Multi-format front-panel card reader
The Vszerda 5.25" unit installs in a standard drive bay and provides six card slots covering CF, MD, XD, MMC, TF, M2 and MS formats. Three USB 3.0 ports and one USB 3.1 Type-C port deliver tested transfer rates up to 500 MB/s. An LED indicator shows active read status and the ABS plastic fascia resists daily wear.
Suits builders who need legacy card support
This panel is aimed at photographers, video editors or archive workers who still use CompactFlash, Memory Stick or older SD variants and want front-access convenience. It does not help users who only need modern UHS-II SD or microSD slots, nor does it serve systems lacking a free 5.25" bay or an internal USB 3.0 header.
Handles multiple simultaneous card transfers
Six slots allow parallel offload from several cameras or drones without swapping media, and the 500 MB/s ceiling covers high-bitrate video ingest. The bottleneck appears when moving large batches across the single USB 3.1 Type-C link, so sustained multi-stream writes will queue behind that shared bandwidth.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $32.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does this front panel need a spare 5.25" drive bay in my case?
Yes, it mounts in a standard 5.25" drive bay and connects to internal USB headers on the motherboard.
Will the USB 3.0 ports on this panel work if my motherboard only has USB 2.0 headers?
The panel uses USB 3.0 and USB 3.1 Type-C interfaces; they will fall back to USB 2.0 speeds when connected to older headers.
How can I confirm the card reader is active after installing it?
The built-in LED indicator lights up whenever a card is being read, giving immediate visual confirmation.
More in SATA & eSATA Drive Cables
Similar items
OWC In-Line Digital Thermal Sensor HDD Upgrade Cable for iMac 2011
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Nippon Labs S3L0.5-90/180SL-50P SATA cable 6 in 90/180° 50-pack
- 6 in (15.2 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





