Vszerda 5-Pin to 3×SATA Modular PSU Cable 88 cm
Connects three SATA drives to a 5-pin modular PSU port using 18 AWG copper wire, 88 cm long, compatible with OCZ ZT and Great Wall units up to 1560 W
- Connect three SATA drives from one 5-pin modular port
- 18 AWG pure copper wire delivers reliable power
- 88 cm length reaches drives in full-tower cases
- Black sleeved finish keeps cable routing tidy
- Compatible with OCZ ZT 650W 750W 850W 1000W 1250W and Great Wall 750W 1000W 1250W 1560W PSUs
Modular PSU Cable for OCZ ZT and Great Wall
This black-sleeved adapter connects a 5-pin modular port on compatible OCZ ZT or Great Wall power supplies to three SATA power connectors. It uses 18 AWG pure copper wire and spans 88 cm in total length. The cable is designed for internal power distribution in desktop builds.
Suits owners of listed OCZ ZT
Builders with OCZ ZT models rated 650 W, 750 W, 850 W, 1000 W or 1250 W, or Great Wall units rated 750 W, 1000 W, 1250 W or 1560 W can use this cable to power up to three SATA devices. Owners of other PSU brands or non-modular units cannot connect the 5-pin end and should look elsewhere.
5-pin modular connector compatibility decides fit
The cable only works when the power supply provides a matching 5-pin modular output wired for the OCZ ZT or Great Wall pin-out. If the PSU lacks that specific port, the adapter will not attach and cannot supply power to the SATA connectors.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 61% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What PSU connector does the 5-pin end of this cable plug into?
The 5-pin modular connector is designed for OCZ ZT series units rated 650W, 750W, 850W, 1000W and 1250W and Great Wall units rated 750W, 1000W, 1250W and 1560W.
How do I install the cable without damaging the SATA power ports?
Align each 15-pin SATA connector with the drive port, press straight in until the latch clicks, and route the 18 AWG sleeved wires so they are not sharply bent near the plugs.
When should I replace this 88 cm sleeved cable?
Replace it if the black sleeving frays, the 18 AWG copper conductors become exposed, or any SATA connector feels loose or shows melted plastic.
More in Internal PSU & Riser Cables
Similar items
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
GELID SOLUTIONS CA-PWM-03 1-to-4 4pin PWM Fan Power Splitter internal power cable
- 1.37 ft (0.42 m)
- Cable Kits





