Vszerda CS0034 SFF-8643 to 4x SATA cable 0.5m
Connects a Mini SAS SFF-8643 controller to four SATA drives at 12 Gb/s over a 0.5 m copper cable
- Rated speed12 Gbit/s
- Connector detailsScsi
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeMini sas
- Product colorBlack
- Connect controllers and drives with SFF-8643 to 4x SATA layout
- Achieve 12 Gbps throughput over SAS interface
- Compact 0.5 m length fits tight chassis routing
- 30 AWG copper conductors deliver reliable signal integrity
- Male latch on SFF-8643 secures connection to controller
Mini SAS SFF-8643 to 4x SATA cable
The Vszerda CS0034 is a 0.5 metre internal cable that connects a Mini SAS SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives. It uses 30AWG copper conductors and is rated for 12 gigabits per second data transfer. The SFF-8643 end has a male latch connector while the four SATA ends are female ports. The cable is black with blue accents.
Builders with SFF-8643 controllers needing four
This cable suits systems where the host side presents an SFF-8643 Mini SAS port and the target drives use standard SATA interfaces. It will not work if your backplane or controller uses the SFF-8644 connector instead of SFF-8643. Buyers who need a longer reach or a different Mini SAS variant should look elsewhere.
Sustained 12 Gb/s throughput over copper
The 30AWG copper conductors maintain the rated 12 gigabits per second speed across the 0.5 metre length during continuous read and write workloads. The short run minimises signal loss compared with longer cables. The SFF-8643 design supports higher port density and a smooth transition path toward 13 Gb/s operation without changing the physical connector.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | CS0034 |
| Product type | Mini sas |
| Product color | Black |
| Performance | |
| Rated speed | 12 Gbit/s |
| Ports & slots | |
| Connector details | Scsi |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What controller port does the SFF-8643 end of this cable plug into?
The SFF-8643 male connector attaches to a Mini SAS host port on a motherboard or RAID controller that uses the SFF-8643 standard.
Can I use this cable with a backplane that has SFF-8644 connectors instead?
No — the supplier states the SFF-8643 host end will not work with SFF-8644 backplane ports.
How can I confirm the cable is delivering the rated 12 Gb/s link speed after installation?
Check the controller BIOS or operating-system storage utility; each of the four SATA drives should negotiate at the controller’s maximum supported SAS rate.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





