Vszerda Double SATA 7Pin Female to Double 7Pin Male Angled Adapter 180 Degree 2pcs
Angled SATA adapter redirects two cables 180 degrees to fit tight chassis spaces
- Conductor typeCopper
- Product color2pcs 180 Degree
- Changes SATA cable direction with 180-degree angled connectors
- Fits tight horizontal SATA ports where straight cables cannot reach
- Routes vertical inward-facing ports cleanly without elbow cables
- Controls two SATA ports simultaneously to save chassis space
- Built from copper conductor with PCB, plastic and metal housing
180-degree SATA adapter pair
This pair of Vszerda adapters redirects two SATA 7-pin ports by 180 degrees, letting builders route cables away from cramped motherboard headers. Each unit converts a single female header into two male plugs so both drives can share the new angle. They suit desktop PCs where horizontal or inward-facing SATA ports block straight cables.
Dual-port capacity for tight layouts
Two drives connect per adapter, giving four device connections from two motherboard ports without adding controllers. The design works while the chassis has room for the right-angle bend; it stops helping once the drives themselves sit flush against a panel or another card. No active electronics are present, so signal quality depends on the cables you attach.
PCB, plastic and metal construction
Gold-plated copper conductors sit on a black PCB wrapped in plastic housing with metal shrouds for durability. The 180-degree angle points cables parallel to the board, reducing strain on ports and keeping the interior tidy. Connectors are standard SATA 7-pin, so they mate with any compliant drive or cable without adapters.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ST-JY |
| Product color | 2pcs 180 Degree |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Will this 180-degree SATA adapter let me keep my existing SATA cables connected in a tight case?
Yes, the dual 7-pin female-to-male design redirects both ports by 180 degrees so your current cables can plug in without clearance issues.
How can I verify the adapter is seated correctly after installation?
Both SATA drives should be detected in BIOS and the OS without intermittent disconnects, and the angled connectors should sit flush against the motherboard ports.
Does the pack of two include any SATA data cables or only the angled adapters?
Only the two 180-degree PCB adapters are supplied; standard SATA 7-pin data cables must be purchased separately.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





