Vszerda Dual M.2 B Key NGFF SSD to 2.5 SATA Adapter
Converts two M.2 B-key NGFF SSDs into a single 2.5 SATA drive
- Supports two M.2 B Key SATA SSDs simultaneously
- Fits a standard 2.5 SATA drive bay
- Driver-free installation saves setup time
- SATA 6 Gbps interface keeps full SSD speed
Dual M.2 B-Key SATA adapter
This adapter lets you install two M.2 B-key NGFF solid-state drives into a single 2.5 inch SATA drive bay. It connects through the SATA III interface and requires no extra drivers or software to operate.
Build integration and space savings
The board fits inside a standard 2.5 inch bay, freeing M.2 slots on the motherboard for other devices. It needs only a SATA data cable and a SATA power connection from the host system.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the adapter saturate at the 6 Gbps SATA III link when both M.2 B-key drives run continuously?
Each B-key NGFF SSD connects through the native SATA III interface, so sustained throughput is limited to the 6 Gbps link speed of the 2.5 SATA host port.
How much heat does the enclosure add when the adapter runs all day with two drives installed?
The driver-free enclosure has no active cooling; heat dissipation relies on the metal casing and the host drive bay airflow.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





