Vszerda Dual SATA 15Pin to 8-Pin (6+2) Power Cable 1m 3 Pack
Three cables convert two SATA power connectors each into an 8-pin (6+2) PCIe plug using 18AWG copper wire
- Connector detailsSata 15pin to 8-pin
- Connector genderMale-to-Male
- Product typeSATA
- Key featuresData Transfer
- Connects low-power GPU via SATA power
- Secure male SATA 8-pin with keyrail prevents accidental disconnect
- 18AWG pure copper wire for stable power delivery
- 8-pin (6+2) fits both 6-pin and 8-pin GPU ports
- Draws power from two 12 V rails to reduce connector strain
Dual SATA to 8-pin power adapter
This three-pack converts two SATA 15-pin power connectors into a single 8-pin (6+2) PCIe plug. Each cable uses 18AWG copper wire and measures 1 metre overall with a 13-inch and a 7.4-inch split. The male-to-male design draws 12 volt power from two separate PSU rails.
Builders adding a low-power graphics card
Suits systems where the power supply lacks native PCIe connectors but has spare SATA leads. Not for high-wattage cards that require dedicated 8-pin or 12VHPWR cables, nor for users who need to power SATA drives from the same connectors simultaneously.
Handles modest GPU loads
Comfortable feeding entry-level or mid-range cards within the SATA connector's current rating. Headroom ends when the graphics card demands more power than two SATA 15-pin sources can safely deliver, risking connector melt or instability.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | YANBORONSN |
| Product type | SATA |
| Ports & slots | |
| Connector details | Sata 15pin to 8-pin |
| Connector gender | Male-to-Male |
Questions about this item
My power supply only has SATA power connectors — can this cable run a graphics card that needs an 8-pin (6+2) PCIe power plug?
Yes, each cable converts two 15-pin SATA male connectors into one 8-pin (6+2) male PCIe plug, drawing 12 V power from two separate PSU rails for a low-power video card.
I still use a motherboard with only 24-pin ATX power — will the 1 m length reach from my PSU to a PCIe slot in a mid-tower case?
The cable is 1 m long with a 13-inch Y-splitter and a 7.4-inch tail, giving enough reach for typical mid-tower layouts even when the 24-pin ATX cable runs short.
After routing the cables, how can I verify the graphics card is receiving stable power through the SATA-to-PCIe adapters?
Boot the system and confirm the GPU fans spin, the card appears in Device Manager without error codes, and no power-limit throttling shows in GPU monitoring software under load.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





