Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects two HDMI 2.0 sources to one display at 4K 60 Hz and extracts audio via optical, coaxial, RCA and 3.5 mm outputs with ARC support
This Vszerda HDMI switch connects two HDMI 2.0 sources to a single display and extracts audio through optical Toslink, coaxial, RCA stereo and a 3.5 mm jack. It supports 4K resolution at 60 Hz with 36-bit deep colour and a maximum bandwidth of 18.2 Gbps. HDCP 2.2 compliance and ARC functionality are included for modern home-theatre setups.
Buyers who want to route a PS5, set-top box or similar HDMI device to one screen while sending sound to a soundbar or amplifier will find the three audio modes useful. The switch handles 2.1-channel stereo and 5.1-channel digital surround via optical or coaxial outputs. It is not for installations that require DVI compatibility or more than two input ports.
The 18.2 Gbps ceiling decides whether high-frame-rate 4K content passes without compression. Sources and cables must meet the HDMI 2.0b specification to use the full 60 Hz refresh rate and RGB 4:4:4 sampling. If the source only delivers 4K at 30 Hz or 1080p, the switch will still operate but cannot exceed its rated bandwidth.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
You need two HDMI 2.0 sources such as a PS5 or cable box and one display with an HDMI input; the switch accepts both sources and routes the chosen signal to the single output at up to 4K@60Hz.
Yes, the switch is backward compatible with 1080p and 4K@30Hz signals, so a 1080p monitor will display the selected source without any extra configuration.
Set the mode switch to 5.1CH, connect the optical or coaxial output to the soundbar, and confirm the soundbar indicates a Dolby Digital 5.1 or DTS 5.1 bitstream while playing compatible content.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?