Vszerda HX-SA-057 IDE 4-pin male to dual female splitter power cable
Splits one IDE 4-pin power connector into two female ports for adding IDE hard drives and CD-ROM drives, supporting 5 V and 12 V DC power
- Rated speed6 GB/s
- Connector detailsIde
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeInternal Power Cable
- Product colorIDE-4P to Dual IDE-4P
- Powers two IDE drives from one connector
- Supplies both 12 V and 5 V rails
- Copper conductors carry power efficiently
- Male-to-dual-female Y splitter adds outlets
- Extends reach for drive placement flexibility
Vszerda HX-SA-057 IDE power splitter
This Vszerda HX-SA-057 cable splits one IDE 4-pin male connector into two female connectors. It adds extra power outlets for IDE hard drives and CD-ROM drives. The adapter supports both 12V and 5V DC power delivery. It suits builders maintaining or expanding legacy storage configurations.
Installation and common issues
Connect the male end to the power supply and attach drives to the female ends. The Y-splitter design requires no tools for installation. Ensure connectors seat fully to avoid intermittent power. Loose pins or reversed orientation can prevent drives from spinning up.
What to check before ordering
Verify your power supply has an available IDE 4-pin male connector. Confirm the target drives use matching 4-pin female power inputs. Check that the cable length reaches your drive bays without strain. This splitter does not convert to SATA or other interfaces.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | HX-SA-057 |
| Product type | Internal Power Cable |
| Product color | IDE-4P to Dual IDE-4P |
| Performance | |
| Rated speed | 6 GB/s |
| Ports & slots | |
| Connector details | Ide |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How can I confirm the Vszerda HX-SA-057 cable is delivering both 12V and 5V power to my IDE drives after connecting it?
After installation, check that each connected IDE hard drive or CD-ROM drive spins up and is recognised by the system BIOS, confirming both voltage rails are active.
What connectors are included with the Vszerda HX-SA-057 and do I need any additional cables to add two IDE drives?
The cable provides one 4-pin Molex male plug and two 4-pin IDE female sockets; no extra cables are required to power two drives from a single PSU outlet.
Which version of the Vszerda HX-SA-057 should I choose for a standard internal IDE power setup?
The HX-SA-057 is a single model designed as a 1-to-2 Y splitter for internal IDE power, so there are no alternative versions or capacities to select.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 23" 1-to-4 15-Pin SATA Power Splitter Cable
- SATA
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 0.5 m SATA III Right Angle to Right Angle Data Cable 3-Pack Red
- Red





