Vszerda IDE 4-pin to 5× SATA power splitter cable 20 cm black
Converts a single 4-pin IDE power connector into five SATA power connectors using 18 AWG wire in a 20 cm flat-ribbon layout
- Powers five SATA drives from one 4-pin IDE connector
- 18 AWG wires sustain high current without overheating
- Parallel flat-ribbon layout keeps cables tidy inside the case
- 20 cm main lead plus four 10 cm branches reach multiple drive bays
- Straight 15-pin SATA plugs fit hard drives and SSDs directly
Vszerda IDE to 5 SATA Power Splitter
This 20 cm black cable converts a single large 4-pin IDE power connector into five 15-pin SATA power plugs. It is built with 18AWG wire rated for continuous high-current delivery. The flat parallel layout keeps wires neat and simplifies routing inside a PC or server chassis. Ideal for adding multiple SATA hard drives or SSDs to a system that only offers legacy IDE power outputs.
Verify IDE power availability and device count
Before ordering confirm that your power supply provides a free large 4-pin IDE connector. Each of the five SATA plugs can power one SATA drive so ensure you have enough devices to justify the splitter. The straight SATA connectors require adequate clearance around each drive bay. No additional adapters are included in the package.
Steady power delivery across all five ports
The 18AWG conductors maintain stable voltage across all five SATA outputs during sustained operation. Flat parallel construction reduces resistance and heat build-up compared with bundled round cables. This design supports continuous drive arrays without the voltage sag that can occur on thinner splitters. Reliable performance is maintained throughout extended read or write sessions.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the cable include any mounting hardware or extra connectors beyond the five SATA plugs?
The package contains only the splitter cable itself — one large 4-pin IDE plug feeding five straight 15-pin SATA power connectors. No screws, brackets or additional adapters are supplied.
How do the 20 cm and 10 cm segment lengths affect which drives I can reach?
The first SATA connector sits 20 cm from the IDE plug; each of the next four connectors adds another 10 cm. Choose this version if your drives are spaced roughly 10 cm apart along a single cable run.
Will the 18 AWG wires safely deliver enough current for five mechanical hard drives spinning up together?
The 18 AWG conductors are rated for continuous high-current supply, so the cable can handle the combined spin-up surge of multiple SATA hard drives from a single IDE power source.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





