Vszerda IDE to SATA Adapter 7+15 Pin 3.5/2.5" Wide Board
Converts 3.5 or 2.5 inch SATA drives to PATA IDE using a 40-pin data connector, 7+15-pin power and data interface, and supports ATA 100/133 speeds
- Conductor typeCopper
- Product colorWide board
- Connects SATA drives to IDE motherboards using 7+15 pin female SATA and male IDE connectors
- Supports both 3.5 and 2.5 inch SATA hard drives and optical drives
- Enables ATA 100/133 transfer rates for legacy system compatibility
- Wide board design measures 2.6 cm for secure installation
- Plug-and-play operation requires no driver installation
Wide-board IDE-SATA adapter
This Vszerda adapter converts a SATA 7+15 port to a 40-pin PATA IDE interface so a 3.5-inch or 2.5-inch SATA hard drive or optical drive can connect to an older IDE motherboard header. It is built on a 2.6 cm wide green PCB with copper conductors and includes a 4-pin Molex power connector. The unit weighs 20 g and supports ATA 100/133 speeds.
Plug-and-play with enclosure limitation
Installation requires no drivers; simply attach the SATA data and power connectors to the drive, plug the 40-pin IDE end into the motherboard and connect the Molex lead to the power supply. The wide board may not fit inside tight external drive enclosures, so verify internal clearance before ordering. The adapter cannot be used with external hard drive enclosures.
Bidirectional ATA 100/133 support
The single specification that decides compatibility is the supported transfer mode: ATA 100/133. Drives or controllers limited to slower PIO modes will work but will not reach the adapter's maximum throughput, while systems requiring Ultra DMA modes beyond 133 are not supported.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Product color | Wide board |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How do I confirm the Vszerda IDE to SATA adapter is working after connecting it?
After setup, the system BIOS or operating system should detect the attached drive at ATA 100/133 speeds, confirming the adapter is functioning.
What comes in the box with the Vszerda Wide Board adapter and what extra parts are needed?
The package includes one SATA 7+15 to PATA IDE adapter converter; you must supply a 4-pin Molex power connector and a 40-pin IDE cable separately.
Which board width should I choose for the Vszerda adapter, 2.6 cm or 1.7 cm?
Select the 2.6 cm Wide Board version if your drive bay or motherboard layout needs the larger footprint; choose the 1.7 cm Narrow Board for tighter spaces.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





