Vszerda Internal Mini SAS HD SFF-8643 to 4xSATA Cable 1m
Connects a Mini SAS HD SFF-8643 controller to four SATA drives at 6 Gbps, with sideband signal support for backplanes and RAID cards
- Rated speed6 Gbit/s
- Connector detailsSff-8643 to 4x Sata
- Connector genderMale-to-Male
- Conductor typeCopper
- Product typeInternal Mini SAS HD Cable
- Product colorSFF-8643 to 4SATA
- 6 Gbps data speed for SATA III drives
- 12 Gbps SAS 3.0 host link with 4× SATA breakout
- 1 m length and 30 AWG ribbon cable for tight chassis routing
- Sideband signal support for backplane and RAID card management
- 50,000+ insertion cycles rated from -40 °C to +85 °C
Internal SAS-to-SATA bridge
This 1-metre cable connects a Mini SAS HD SFF-8643 port on a RAID card or HBA to four SATA hard drives or SSDs. It carries side-band signals so backplanes and expanders can monitor drive status. The assembly is built for continuous server and data-centre use.
Replaces bulkier fan-out cables
The 30 AWG ribbon construction reduces cable volume, easing routing in dense chassis and improving airflow compared with older round fan-out looms. The upgrade is worthwhile when cable congestion raises intake temperatures or blocks drive-bay access.
Sustained 6 Gbps per lane under load
Each of the four SATA lanes maintains 6 Gbps throughput during long sequential transfers without throttling. The PVC jacket is rated for 50,000 insertion cycles and an operating range of -40 °C to +85 °C, supporting 24/7 operation in hot aisles.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Ipolex |
| Model name | CAB-8643/4SATA-P1M-1pc |
| Product type | Internal Mini SAS HD Cable |
| Product color | SFF-8643 to 4SATA |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sff-8643 to 4x Sata |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What clearance does the 30 AWG ribbon cable need inside a 1U chassis?
The 30 AWG ribbon construction is thinner than round cables, allowing tighter bends and better airflow in dense server chassis.
Which side of the SFF-8643 plug carries the sideband signal pins?
The sideband pins are on the wider face of the SFF-8643 connector; align the keyed notch with the controller receptacle before pressing firmly until the latch clicks.
How many mating cycles is the PVC jacket rated for before replacement?
The jacket withstands 50000 insertions; inspect for cracked insulation or bent pins after heavy re-cabling and replace if any conductor is exposed.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





