Vszerda Internal Mini SAS HD SFF-8643 to 4xSATA Cable with Sideband 0.5m
Connects one Mini SAS HD SFF-8643 port to four SATA drives with sideband support for 12Gbps SAS and 6Gbps SAS or SATA devices
- Connector detailsSff-8643 to 4x Sata
- Product typeInternal Mini SAS HD Cable
- Product colorBlack
- Overall length0.5
- Key featuresData Transfer
- Connect 12 Gbps SAS drives via SFF-8643 for maximum throughput
- Support 6 Gbps SAS and SATA devices on the same cable
- Sideband channel enables drive monitoring and control
- Four right-angle SATA connectors fit tight drive bays
- .5 m length keeps internal routing clean and short
Mini SAS HD SFF-8643 breakout cable
This cable splits one Mini SAS HD SFF-8643 port into four SATA connectors with sideband support. It suits builders adding 12Gbps SAS or 6Gbps SAS/SATA drives to a backplane or HBA. The 0.5m length keeps routing tidy inside dense chassis.
12Gbps SAS and 6Gbps SAS/SATA limits
The link runs at 12Gbps with compatible SAS drives and drops to 6Gbps for SAS or SATA devices. Each SATA leg shares the single upstream lane so aggregate throughput depends on drive mix and controller queue depth. Cable length is fixed at 0.5m.
Right-angle SATA plugs and sideband wiring
Right-angle SATA connectors sit flat against drive PCBs for tight backplane bays. Sideband pins carry SGPIO or I²C signals so enclosure LEDs and drive status report correctly. Black jacket and moulded strain relief resist snagging during drive swaps.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Ipolex |
| Product type | Internal Mini SAS HD Cable |
| Product color | Black |
| Ports & slots | |
| Connector details | Sff-8643 to 4x Sata |
Questions about this item
Should I choose the .5 m length or a longer cable for my chassis?
The .5 m length suits compact builds; measure your controller-to-drive distance and select a longer cable only if the route exceeds that reach.
What does 12 Gbps mean once the cable is installed?
It supports 12 Gbps SAS drives and falls back to 6 Gbps for SAS or SATA drives, so actual throughput matches the slowest device on the link.
Does the SFF-8643 connector limit speed compared to other SAS interfaces?
The SFF-8643 Mini SAS HD connector is rated for 12 Gbps, so it does not cap performance below the drives’ 12 Gbps or 6 Gbps capability.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





